12
Troubleshooting
Trouble
Possible Cause
Remedy
Adnormal Noise,
Lawnmower Rattles
Screws on the cutting
equipment or housing is loose
Blade is too blunt
Cutting height too low
Cutting gap between blade roller
and lower blade is too largwe
Tighten bolts & nuts
Sharpening the blade (it is
recommended the blade
sharpenin should be
arranged by the service
agent or similarly qualified
persons in order to avoid a
safety hazard.)
Use a slightly higher cutting
height
Adjust the distance in
between cutting bar and
blade
Lawn turning yellow,
cut not clean
The appliance
leaves deep tracks
Ground softened by
water,lawn too wet
Allow lawn to dry, do not
mow if grass is wet
Suspected malfunctions are often due to causes that the user can fix themselves. Therefore
check the product using this section. In most cases the problem can be solved quickly.
The following chart lists problem symptoms, possible causes and corrective action, if your
hand push mower does not operate properly. If these do not identify and correct the problem,
contact your service agent or similarly qualified persons in order to avoid a safety hazard.
.
