CHANGE OIL
1.
Let the engine run out of petrol, and wait until the engine has stopped and cooled down.
2.
Disconnect the spark plug cap and remove the spark plug.
3.
When the engine is still warm, remove the oil drain plug (A). Drain the oil into an appropriate
container.
4.
Clean the oil drain plug before putting it back.
5.
Place the engine level. Remove the dipstick. Add about 0.5L of new SAE30 oil slowly to the upper
limit on the dipstick, do not overfill.
6.
Replace dipstick.
WARNING
: Prevent skin contact with used engine oil. Wash your skin with soap and water after
changing the oil.
CAUTION:
Used oil is a hazardous waste product. We recommend that you take used oil to your local
recycling centre in a properly sealed container. Do not discard with household waste
.
SPARK PLUG
Once the engine has cooled, remove the spark plug cap and spark plug. Clean the plug with a wire
brush. Using a feeler gauge set the gap to 0.75 mm (0.030”). Refit the spark plug taking care not to
overtighten.