Installing the Battery In the Remote Control
NOTE: The battery for the remote control (1 CR20S lithium
battery) is included. To activate the battery pull out and
remove the plastic insulating strip. Replace the battery,
push and slide out the battery door in the remote control.
Replace the battery with a new CR2025 battery with the
po”facing up. Slide the door back.
Setting up the Speaker
1. Connect the wooden tower base to the
speaker using the supplied screws (Fig 1).
2. Connect the small end of the AC adapter
to the AC adapter port on the back of the
speaker. Connect the other end to an
available wall power outlet (Fig 2).
1
2
07
