FM Radio Mode
To listen to the radio by scanning
1. Press the Mode/Light button on the speaker or the Mode
button on the remote control repeatedly until the LED FM
radio indicator light turns green.
2. Press and hold the Scan & Play/Pause button on the
speaker for a second and then release, or press the Scan
& Play/Pause button on the remote control. All available
stations will be searched and then stored into the memory
automatically.
3. After scanning, press the numeric buttons on the remote
control to select 1-20 pre-set stations. Eg. Pressing 1
means pre-set station 1, pressing 2 and 0 means pre-set
station 20 etc.
Note: After scanning and saving stations, if the Wireless
Tower Speaker is turned off and then back on, be sure to
select your preset stations with the numeric buttons. If you
press the Scan & Play/Pause button again, the scanning
process will start again.
Listening to the radio by manual search
Quick press the Volume Down/Fast Backwards and Volume
Up/Fast Forwards buttons on the speaker or the remote
control to go to the next station
Note: To enhance radio reception, fully unwind and extend
the FM antenna wire located on the back of the speaker.
11
