background image

                                                                                                                             

 

Page 

12                                  

 

                                                       

FCC  Statement 

 

 

 

PLEASE NOTE: It is normal for your repeater to be quite warm while in use. 
Note: This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, 
uses and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures:   

 

Reorient or relocate the receiving antenna.   

 

Increase the separation between the equipment and receiver.   

 

Connect the equipment into an outlet on a circuit different from that to which the receiver 
is connected.   

 

Consult the dealer or an experienced radio/TV technician for help.   

The antenna used for the transmitter must not be connected to, or operating in conjunction 
with any other antenna or transmitter.   

Modifications not expressly approved by JDTECK could void the user's authority to operate the 
equipment under FCC rules. 

Summary of Contents for JD55-PR819














Reviews: