2. Wait a few seconds while the scan tool validates the PID MAP.
3. If retrieved information covers more than one screen, use the
Direction button, as necessary, until all the data have been shown
up.
• If there is no freeze frame data available, an advisory message “No
freeze frame data stored!” shows on the display.
4. Press OK button to return to previous screen
• Retrieving I/M Readiness Status
I/M Readiness function is used to check the operations of the
Emission System on OBD2 compliant vehicles. It is an excellent
function to use prior to having a vehicle inspected for compliance to
a state emissions program.
CAUTION - By clearing trouble codes you also clear the readiness
status for the individual emission system readiness tests. In order to
reset these monitors, the vehicle must be driven through a complete
drive cycle with no trouble codes in memory. Times for reset vary
depending on vehicle.
Some latest vehicle models may support two types of I/M Readiness
tests:
1. Since DTCs Cleared - indicates status of the monitors since the
DTCs are erased.
2. This Drive Cycle - indicates status of monitors since the beginning
of the current drive cycle.
