background image

Assembly Instructions 

12

Step

 

16

We recommend that this

unit is fixed to a suitable

wall to prevent possible

overbalancing. We have

included a fixing bracket

for this. No fixing screws

are provided as they will

need to suit the wall 

type, and the length of 

screw will depend on 

the distance from the 

back of the unit to the

wall. Please ensure

fixings used are 

appropriate to your wall

type. Locate the bracket

to the top panel or to the

end panel as close to

top as possible. We do

not specify exact 

location for the bracket,

this is left to the 

customer’s discretion.

Fixing to wall 

Please take care when 

drilling into the wall, 

avoiding any pipes and 

wires. Wear safety 

goggles when drilling. 

The use of residual 

current device (RCD) is

recommended when 

working with tools.If in 

doubt consult a 

qualified person.

Warning:

2 people to lift.

Lift with care.

With help move the 

unit into position.

Warning:

Locate hanging rail

onto brackets already

attached. The hanging

rail just slots onto the

brackets.

Locate hanging rail

D

x2

J

x4

Summary of Contents for 2 Door 1 Shelf Mirrored Robe

















Reviews: