background image

Important

 

- Please read these instructions fully before starting assembly

Safety and Care Advice

   Check you have all the 

components and tools listed on

pages 2 and 3.

   Remove all fittings from the 

plastic bags and seperate them

into their groups. 

   Keep children and animals

away from the work area, small

parts could choke if swallowed.

   Make sure you have enough 

space to layout the parts before

starting.

   Do not stand or put weight on

the product, this could cause

damage.

   Assemble the item as close

to its final position (in the same

room) as possible.

   Assemble on a soft level 

surface to avoid damaging the

unit or your floor.

   Parts of the assembly will be 

easier with 2 people.

We do not 

recommend the 

use of power

drill/drivers 

for

 

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

Care and maintenance

   Always lift furniture when 

moving it (do not drag) 

otherwise the joints may be 

damaged.

   From time to time check that

there are no loose screws on 

this unit.

   This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

1

   Dust surfaces with a soft, dry, 

lint free cloth.

   More stubborn marks can be 

removed using a damp 

(not wet) cloth. Wipe the 

surface dry immediately 

using a soft lint free cloth.

   Do not use detergents, abrasive

cleaning products or cleaning 

products that contain ammonia, 

solvents or silicone as these 

may damage the surface finish.

   To protect the furniture,

position the furniture out of 

direct sunlight and away from

direct heat sources such as

radiators and fires.

   Do not place the furniture in

excessively dry and humid

conditions.

   Do not place hot or cold 

objects on the surface, always

use protective mats to avoid

marking the furniture.

   Clean spills up immediately

   Dispose of all packaging

carefully and responsibly

when assembly complete.

   Do Not dispose of packaging

until assembly complete.

  

Summary of Contents for 023 9433 Series














Reviews: