WARNING
Don't leave the steamer unattended during the lime scale removal
process and/or while in us
e
NOTICE:
Preform a test cleaning on a suitable isolated area after each lime scale removal to
ensure that there is no debris left in the system.
Cleaning bocked steamer accessories
Due to the high mineral content of water in some areas, you may notice that less
steam comes out form the Hand-Held steamer accessories
This may be caused by calcium buildup inside the tip of the nozzle
How to cleaning calcium buildup
We recommend using a spray lubricant. Spray a small burst or two of the lubricant
inside the tip of the Jet Nozzle. After spraying lubricant inside the component, till the
steamer with water according to the directions and run a continuous jet of steam
through the affected accessory for several minutes to remove the deposit once the
steam pathway is clear, aim the steamer at a neutral surface or cleaning cloth to make
sure no debris is emitted.
This product contains no serviceable parts. Do not try to repair it yourself. Any
servicing that requires disassembly other than cleaning must be performed by a
qualified appliance repair technician.
ALL servicing should be done by an authorized service representative.
CLEANING MICROFIBER PAD
Machine washable on "warm" setting. Always use a mild detergent.
For best care results, lay flat to dry
IMPORTANT
：
Allow the steamer to fully cool down before performing any
maintenance or troubleshooting checks.
IMPORTANT
：
Never use bleach or fabric softener when washing the microfiber
cleaning pad.
STORAGE
After the steamer is used, turn power off and then unplug the power cord.
Take out the water tank ,and empty the residual water in the tank and clean the
external surface with a dry cloth. Until the steam mop cools down, clean
appliances
Remove the cleaning pad and wash it so that it will be ready for next use.
