JCROffroad BR6RK-HT, Install Instructions Manual

Page: 15 / 16

ASSEMBLY
15
Finally, with the rack secured into position, find the outer M mounts and
attach the remaining rubber sheets the bottom of each. On these mounts,
do not cover the hooked portion with the rubber because it will not fit
into position if you do so. For visual aid on this step, check out 18:50 in the
instruction video at the bottom of the rack’s product page. You can then
bolt them onto the rack using the hardware that is holding the inner M
mounts in place. Make sure to slip the hooked portion of the mounts into
the small slot in the hardtop, similar to the way the R mounts install, except
without the extra cutout to locate it. The arrows should point towards the
front of the vehicle.