JCROffroad BR6RK-HT, Install Instructions Manual

Page: 14 / 16

ASSEMBLY
4
Next, find the outer R mounts and attach more of the rubber sheets the
bottom of each, similar to the inner mounts. Be sure to cover the top of
the hook portion as well. For visual aid on this step, check out 5:20 in the
instruction video at the bottom of the rack’s product page.
5
Once the rubber is in place, remove the hardware holding the inner
R mounts in place and loosely install the outer R mounts using that
hardware. They mount to the outside of the side rails through the same
holes as the inner mounts and the bottom hook flange slides into the
cutouts in the side of the hardtop above the windows. The arrows should
be pointing towards the front. Once everything is loosely in place, tighten
them fully while making sure that the inner mounts are pushed down tight
to the surface of the roof.