04
LED display description
Display
Description
F
F means Forward/Clockwise rotating direction, it displays from F00 up to F30
(00 means no rotating speed, 30 means 30000rpm)
R
R means Reverse/Counterclockwise rotating direction, it displays from R00 up to
R30 (00 means no rotating speed, 30 means 30000rpm)
PRU
PRU means pause, tthe handle will stop running, press again to reactivate the
rotating speed.
Er0
Er0 means overcurrent protection. When the handpiece current suddenly
becomes too high, it displays Er0 with flashes, and the handpiece stops running to
protect the motor. The protection may not work if the current is too high.
Er1
Er1 means overload protection. It displays Er1 with flashes, and the handpiece
stops running to protect the motor. The protection may not work if the overload is
too high.
Question
Answer
What should a beginner be aware
of?
For a beginner, we always recommend starting with a low rotating
speed, then increase the speed slowly.
How long is the guarantee?
The guarantee for the nail drill is valid for two years. However,
you can always feel free to contact us if the machine has an issue
after two years, we are always at your service.
Can I buy the handpiece sepa-
rately?
Yes, the handpiece can be ordered separately.
Which bit can I use? Only those
from the manufacturer?
All bits with a diameter of 2.35 mm fit in the handpiece, 2.35 mm
is the standard size.
Is the device suitable for removing
thick calluses on the foot?
Yes, you can use the sanding bands to remove the thick calluses.
Are the bits also suitable for acry-
lic and gel nails?
Yes.
How long do nail drill bits last?
It depends on the using times. The bits are consumer goods and
need to be replaced regularly.
How to clean the bits?
The bits can be cleaned with a disinfectant spray.
FAQ