03
How to use the machine
1. Insert the nail drill bit, connect the handle to the host, and then connect the
power supply.
2. Turn on the nail drill (You will hear a ‘’click’’ sound).
3. Press on to change the rotational direction
(Clockwise/ Counterclockwise).
4. Turn the rotating speed controller slowly toward clockwise to increase the
speed.
5. Turn the rotating speed controller slowly toward counterclockwise to decrease
the speed.
6. Press on then the handle will stop running, press again to reactivate the
rotating speed.
1. Turn the twist-lock to the left to unlock the drill bit.
2. Pull out the original bit and insert the desired bit (2.35mm).
3. Turn the twist-lock to the right to lock the drill bit.
How to change the drill bits:
*Do not turn the twist-lock
while the handle is running
R:Unlock the bit
S:Lock the bit