1248015-GB_v1.1
ROLLER 868
2
INSTALLATION
Fit the rear of the box to the wall using the raw plugs and screws supplied. Pass the cables
through the bottom of the equipment. Connect the power supply cables to the terminals on
the printed circuit, following the indications engraved on the board. Fit the front of the
equipment to the rear using the screws supplied.
OPERATING
CONTROL PANEL OPERATIONS
Power supply:
The green pilot light indicates the correct power supply to the equipment.
OPTIONS SELECTOR
OFF position (default option)
ON position
1 = AUTO CLOSE
Semi-automatic operating = it does not
closes automatically
Automatic operating = it closes
automatically
2 = DEAD MAN
Semi-automatic operating or automatic
depending on 1 selector
Dead man operating
PUSHBUTTONS
START
Black
It carries out the same function as a NC button in ALT terminals
PROG./RESET
Red
It carries out two functions: time programming and transmitter
programming
A) SEMI-AUTOMATIC / AUTOMATIC OPERATING
The Start button carries out the following function. When the button is pressed for the first
time, the motor starts, when pressed for the second time (if it has not reached the limit
switch) it stops, and it closes automatically or it waits for the third time to close.
Automatic
closure will only be carried out if the entire opening movement has been completed and
option switch 1 is turned to ON.