JCM GEN2U, Training Overwiev

Page: 16 / 20

Part No. 960-000192R_Rev. A © 2017 JCM American Corporation
1 6
GEN2U™ Printer JCM® Training Overview August, 2017
BLUEWAVE™DX DOWNLOAD
The JCM
BlueWave™DX Tool
offers an alternate method for updating the
Firmware on the GEN2U Printer. To do so, proceed as follows:
S
ETUP FOR THE
B
LUE
W
AVE
DX T
OOL
1. Within the BlueWaveDX Tool’s
SD Card
root directory, create a new
GEN2U
System
folder.
2. The Firmware files for the GEN2U Printer should be placed within the new
GEN2U System folder.
U
PDATING
F
IRMWARE
U
SING THE
B
LUE
W
AVE
DX T
OOL
1. Connect a standard
USB Male "A" to Male "B"
cable from the BlueWaveDX
Tool’s
USB Connector Type A
(Figure 15 a ) to the GEN2U Printer’s
USB
Update Port
(Figure 15 b ).
2. Turn the BlueWaveDX Tool’s Power Switch
ON
(Figure 15 c ).
3. When the Firmware Update screen appears, press the OK Button (Figure 15 d ).
4. Press the
UP
and
DOWN
arrow keys (Figure 15 e ) to scroll through the list of
available GEN2U Firmware versions.
5. Press the
OK
Button (Figure 15 d ) to select the desired Firmware version.
6. Press the OK Button again to start the download.
7. When the
Download Complete
message is displayed, press the
CLR
Button
(Figure 15 f ) to return to the Main Menu
OR
Press the OK Button (Figure 15 d ) to download Firmware to another Printer.
NOTE: Sub-folders are not recognized.
a
c
d
e
f
b
Figure 15 BlueWaveDX Tool Primary Controls/GEN2U USB Update Port