P/N 960-000173R_Rev. A {EDP #229278}
© 2013, JAPAN CASH MACHINE CO., LTD.
2 9
Series Banknote Acceptor (EBA-40) Integration Guide
Red
(8)
Green Lit
I2C Access Error
While communicating with each device on the CPU Board, Sensors detect an
abnormal operating condition.
[Solution] Check that the following part is properly assembled and/or Harness
connected. Clean the following part.
[Relative Parts] Stacker.
If the error is not resolved, change the above related part or parts.
Red
(1)
OFF
Cash Box Full
Sensors detected that the Cash Box is full.
[Solution] Remove Banknotes from the Cash Box.
Check that the following parts are properly assembled and/or Harness connected.
Clean or adjust the following parts and Sensors.
[Relative Parts] Pusher Mechanism, Stacker Motor, Stacker Home Sensor, Stacker
Motor Encoder.
If the error is not resolved, change the above related part or parts.
Red
(2)
OFF
Pusher Mechanism
Home Position
Error
When stacking Banknotes, the Pusher Mechanism is not returning to the Home
position.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Pusher Mechanism, Stack Motor, Stack Home Sensor, Stack Motor
Encoder.
If the error is not resolved, change the above related part or parts.
Red
(3)
OFF
Banknote Jam
(Cash Box)
When transporting a Banknote in the Cash Box, the Sensors are not detecting a
Banknote present condition when the time interval is too long, or the pulse number
is greater than specified value for the function.
[Solution] Remove Banknotes from the Cash Box.
Check that the following parts are properly assembled and/or Harness connected.
Clean or adjust the following parts and Sensors.
[Relative Parts] Exit Sensor, Pusher Mechanism, Stack Motor, Stack Home Sensor,
Stack Motor Encoder.
If the error is not resolved, change the above related part or parts.
Red
(4)
OFF
Banknote Jam
(Transport Unit)
When transporting or returning a Banknote in the Transport Unit, the Sensors did
not detect a Banknote present condition when the time interval was too long, or the
pulse number is greater than specified value for the function.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Entrance Sensor, Centering Timing Sensor, Validation Sensor, PB
Entrance Sensor, Exit Sensor, Feed Motor, Feed Motor Encoder.
If the error is not resolved, change the above related part or parts.
Red
(5)
OFF
Feed Motor Speed
Error
While Initializing, no pulse inputs exist greater than the specified value.
[Solution] Remove Banknotes from the EBA Unit.
Check that the following parts are properly assembled and/or Harness connected.
Clean or adjust the following parts and Sensors.
[Relative Parts] Feed Motor, Feed Motor Encoder.
If the error is not resolved, change the above related part or parts.
Red
(6)
OFF
Feed Motor
Lock-Up
While operating the Feed Motor, no pulse inputs occurred greater than the
specified value.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Feed Motor, Feed Motor Encoder
If the error is not resolved, change the above related part or parts.
Red
(7)
OFF
Stacker Motor
Lock-Up
While operating the Stacker Motor, no pulse inputs occurred greater than the
specified value.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Stacker Motor, Stacker Encoder.
If the error is not resolved, change the above related part or parts.
Red
(8)
OFF
Reserved
Contact your local JCM Representative if this error occurs.
Red
(9)
OFF
PB Unit Error
The Anti-Pullback (PB) Unit has not performed correctly.
[Solution] Check that the following parts are properly assembled and/or Harness
connected.
[Relative Parts] PB Unit, PB Home Position Sensor.
If the error is not resolved, change the above related part or parts.
Red
(10)
OFF
Cash Box Removal
The Cash Box has been removed.
[Solution] Firmly re-seat the Cash Box.
Check that the following part is properly assembled and/or Harness connected.
Clean or adjust the following Sensor.
[Relative Parts] Box Sensor.
If the error is not resolved, change the above related part or parts.
Table 23
LED Flash Error Codes (Continued)
LED
Sequence
LED Color
State
Error
Causes and Solutions
