Programming
Starting up
IN1 and IN2 connections
See Table IN1 CONNECTION. * These two configurations are supported only if work-
ing in WORK mode in the receiver.
In programming mode, the receiver will warn us that it cannot support these con-
figurations, emitting 6 continuous beeps and leaving programming mode.
Programming transmitter to receiver
The receiver allows programming 6 transmitters (3 for Relay 1 and 3 for Relay 2).
Each safety edge transmitter must be learnt into the appropriate channel of the safety
edge receiver. A transmitter should only be connected to one receiver.
Press PROG button and keep pressed until desired mode selected.
jcm
technologies
8
Summary of Contents for RB3 TGL868
Page 1: ...RB3 TGL868 User Manual...
