JCM GLOBAL UBA Pro RT Series, Operation And Maintenance Manual

Page: 78 / 196

P/N 960-000213R_Rev.A © 2020, JAPAN CASH MACHINE CO., LTD.
4 - 1 4
Section 4 UBA Pro RT/RQ™ Series Banknote Recycler Disassembly/Reassembly
TR Worm Wheel (Twin) Removal
To remove the TR Worm Gear (Twin) out of the
RQ Frame Unit, proceed as follows:
1. Remove the two (2) Screws (Figure 4-65 a
1
& a
2
)
to remove the Box Connect Module (Figure 4-65
b ).
2. Remove the eight (8) Screws (Figure 4-66 a
1
through a
8
) to remove the Rear Motor Cover(Fig-
ure 4-66 b ).
3. Remove the Wheel Assy. (Figure 4-67 a ).
4. Remove the two (2) Bearings (Figure 4-67 b
1
&
b
2
) from the TR Worm Wheel (Twin) (Figure 4-
67 c ).
Quad TR Motor Harness Assy.
Removal
To remove the Quad TR Motor Harness Assy., pro-
ceed as follows:
1. Remove the Motor Assy. (Figure 4-68 a ).
2. Remove the two (2) Screws (Figure 4-69 a
1
&
a
2
).
3. Remove the Detection Plate (Figure 4-69 b ), the
Motor Plate (Figure 4-69 c ) and the Pinion Gear
(Figure 4-69 d ) from the Quad TR Motor Harness
Assy. (Figure 4-69 e ).
Figure 4-65 TR Worm Wheel (Twin) Removal
Figure 4-65 TR Worm Wheel (Twin)
Removal (RQ Frame Unit) 1
b
a
2
a
1
Figure 4-66 TR Worm Wheel (Twin) Removal
Figure 4-66 TR Worm Wheel (Twin)
Removal (RQ Frame Unit) 2
b
a
1
a
2
a
3
a
5
a
4
a
6
a
7
a
8
Figure 4-67 TR Worm Wheel (Twin) Removal
Figure 4-67 TR Worm Wheel (Twin)
Removal (RQ Frame Unit) 3
a
b
2
c
b
1
Figure 4-68 Quad TR Motor Harness Assy.
Figure 4-68 Quad TR Motor Harness Assy.
Removal 1
a
Brown
Red
NOTE: For the reassembly, ensure that the
Motor Assy. is installed considering the
positions of the “Brown” and “Red” Cables.
Figure 4-69 Quad TR Motor Harness Assy.
Figure 4-69 Quad TR Motor Harness Assy.
Removal 2
c
b
a
1
a
2
d
e