JCM GLOBAL UBA Pro RT Series, Operation And Maintenance Manual

Page: 103 / 196

P/N 960-000213R_Rev.A © 2020, JAPAN CASH MACHINE CO., LTD.
6 - 1 1
Calibration and Testing UBA Pro RT/RQ™ Series Banknote Recycler Section 6
Solenoid Test (RT Transport)
To perform the Recycler’s Solenoid Test on the RT
Transport side, proceed as follows:
1. Ensure that the Recycler and Cash Box is prop-
erly installed.
2. Launch the Performance Test Program (see
page 6-7).
3. Select “
TWIN_SOLENOID_TEST
” (Figure 6-47
a ).
4. Click the “
Start
” Screen Button (Figure 6-
47 b ) to begin the Test.
5. Confirm the “
ON/OFF
” indication in the “
RC-
Solenoid (RC-Twin)
” area (Figure 6-48 a ) is
switched as Solenoid moves automatically.
6. Click the “
Stop
” Screen Button (Figure 6-
48 b ) to end the test.
Drum 1 Motor Speed Test (RT Transport)
To perform the Drum 1 Motor Speed Test on the
RT Transport side, proceed as follows:
1. Ensure that the Recycler and Cash Box is prop-
erly installed.
2. Launch the Performance Test Program (see
page 6-7).
3. Select “
TWIN_DRUM_MOTOR_TEST1
” (Figure
6-49 a ).
4. Click the “
Start
” Screen Button (Figure 6-
49 b ) to begin the Test.
5. The measured speed will appear in the “
RC-Drum
Motor 1 (RC-Twin)
” area (Figure 6-50 a ) on the
Screen.
6. Confirm that the motor speed is in the acceptable
range:

700mm/sec to 950mm/sec (Forward/Reverse)
7. Click the “
Stop
” Screen Button (Figure 6-
50 b ) to end the test.
Figure 6-47 Solenoid Test (RT Transport) 1
Figure 6-47 Solenoid Test (RT Transport) 1
a
b
Figure 6-48 Solenoid Test (RT Transport) 2
Figure 6-48 Solenoid Test (RT Transport) 2
a b
Scroll
Figure 6-49 Drum 1 Motor Speed Test (RT
Transport) 1
Figure 6-49 Drum 1 Motor Speed Test
(RT Transport) 1
b
a
Figure 6-50 Drum 1 Motor Speed Test (RT
Figure 6-50 Drum 1 Motor Speed Test
(RT Transport) 2
a
b
Scroll