TBV™-100/101 Units
12
BLUEWAVEDX (DT-300)
To access BlueWaveDX Download Tools, perform the following
steps:
1. Copy the
TBV Firmware
file to the
TBV-100 System
folder on
the SD Card for the BlueWaveDX.
2. Connect the BlueWaveDX (DT-300) Unit to the TBV Unit
using a Male A to mini-B USB Cable (Figure 5
a
).
3. Slide the BlueWaveDX Power switch ON (Figure 5
b
).
4. From the Firmware menu, press the OK button (Figure 5
c
).
5. Scroll through the TBV Firmware versions to select the
desired version, then press the OK button (Figure 5
c
).
6. Press the OK button to begin the Download (Figure 5
c
).
7. When the Download is complete, press the CLR button to
return to the menu (Figure 5
d
).
8. Disconnect the USB Cable from the Unit (Figure 5
a
).
Figure 5
BlueWaveDX (DT-300) Unit
a
d
c
b
