manualshive.com logo in svg

JCM GLOBAL RDM-100 Series, Integration Manual

The JCM GLOBAL RDM-100 Series is a cutting-edge product designed for seamless integration within various systems. With our comprehensive Integration manual, users can easily understand and implement its features. Download this free manual from our website manualshive.com to optimize your experience with this exceptional product.

Share
Download
background image

Table of Contents

 P/N 960-000186R_Rev. A {EDP #253995}

 © 2016, JAPAN CASH MACHINE CO., LTD.

ii

Page

 RDM-100™ Series Retail Deposit Module

USB Communication Interface Schematics ..................................................................................24

BAU Communication Interface Schematics ..................................................................................25

7

OPERATIONAL FLOWCHART ............................................................................. 26

Operational Flowchart (Continued 1).................................................................................27

8

TROUBLESHOOTING........................................................................................... 28

Introduction ........................................................................................................................28

Troubleshooting Overview .................................................................................................28

Fault Table Listings ............................................................................................................28

9

UNIT DIMENSIONS ............................................................................................... 33

Entire Unit Outside Dimensions.....................................................................................................33

Entire Unit with Optional Top Cover Outside Dimensions .............................................................34

RDM-100 Installation/Maintenance Space Requirements .................................................35

10 TECHNICAL CONTACT INFORMATION ............................................................. 37

Americas .......................................................................................................................................37

JCM American.............................................................................................................................37

Europe, Middle East, Africa & Russia ...........................................................................................37

JCM Europe GmbH.....................................................................................................................37

UK & Ireland ..................................................................................................................................37

JCM Europe (UK Office)..............................................................................................................37

Asia and Oceania ..........................................................................................................................37

JCM Gold (HK) Ltd. .....................................................................................................................37
JAPAN CASH MACHINE CO., LTD (HQ)....................................................................................37

11 INDEX .................................................................................................................... 39

Summary of Contents for RDM-100 Series



















































Reviews:

No comments

Related manuals for RDM-100 Series

RAYLASE SS-II Manual preview
SS-II
Brand: RAYLASE Pages: 26
Olympia NC 320 Instructions Manual preview
NC 320
Brand: Olympia Pages: 7

Brands by name

Popular brands

Load more brands