manualshive.com logo in svg

JCM GLOBAL RDM-100 Series, Integration Manual, Page: 30 / 50

Share
Download
JCM GLOBAL RDM-100 Series Integration Manual Download Page 30

P/N 960-000186R_Rev. A {EDP #253995} 

© 2016, JAPAN CASH MACHINE CO., LTD.

2 2

RDM-100™ Series Retail Deposit Module

H

OLDING

 T

RANSPORT

 A

SSEMBLY

 C

LEANING

Open the Upper Transport Assembly and clean Upper and Lower Sensors and Rollers.

 

 

Figure 43 

Holding Transport Assembly (Upper) Sensor/Belt 

Locations

Figure 43 

Holding Transport Assembly (Upper) Sensor/Belt Locations

Holding
Transport
Positioning
Sensor 6

Holding
Transport
Positioning
Sensor 5

Holding
Transport
Positioning
Sensor 4

Holding
Transport
Positioning
Sensor 3

Holding
Transport
Positioning
Sensor 2

Transport

Belt

Figure 44 

Holding Transport Assembly (Lower) Sensor/Belt 

Locations

Figure 44 

Holding Transport Assembly (Lower) Sensor/Belt Locations

Holding
Transport
Positioning
Sensor 2

Holding
Transport
Positioning
Sensor 3

Holding
Transport
Positioning
Sensor 4

Holding
Transport
Positioning
Sensor 5

Holding
Transport
Positioning
Sensor 6

Transport
Belt

Caution: After cleaning each Belt, be sure that the Belts has not come off of the Pulleys and the Belt is positioned 
correctly before closing the Unit.

Summary of Contents for RDM-100 Series



















































Reviews:

No comments