Install the SIM card
You need to insert a SIM card to use the Phone function.
To install the SIM card, follow the instructions on the diagram below.
Make sure that the card’s gold contacts face into the device and push the SIM card into the slot.
Install the memory card
To store additional multimedia files, you need insert a memory card.
Insert a memory card following the instructions on the diagram below.
WARNING:
Use only memory cards that carry the SD Card logo otherwise they may damage
your JCB Toughphone. You can install up to a maximum of 128GB additional memory using
a memory card.
SIM AND MEMORY
CARD TRAY
SIM
MICRO SD
STORAGE
TO INSERT A SIM
OR MEMORY CARD
1
Locate then open the small door
on the side of the phone
2
Push the Eject Pin into the
small hole to unlock the tray
3
Remove tray by sliding out
4
Place the card/s into the tray
5
Slide the tray back into the phone
6
Push the door closed
EJECT PIN
3
JCBPHONE.COM
MODEL: TP231
QUICK START GUIDE