www.jcbphone.com
www.jcbphone.com
UNPACKING
In the box you should find:
• JCB Tough Tablet
• SIM Pin
• USB-C Cable
• Hand Strap & Fixings
Charge the battery
Before using the JCB Tough Tablet for the first time, you should charge the battery fully. Using a
USB-C data cable and appropriate plug adapter charge the battery until the full icon is shown on
the display.
Warning: Use only the Data Cable provided (or a premium cable) and charger which has the
European CE or new UKCA mark. A non-approved, substandard or faulty charger could damage
your tablet.
Install the SIM card
You need to insert a Nano SIM card to use the phone function. To install the SIM card, remove the
rubber bung and pull out the SIM Tray (use the SIM Pin if required).
Make sure that the card’s gold contacts face into the device and push the SIM card into the slot.
You can insert up to two Nano SIM cards. Replace the rubber bung afterwards.
Install the memory card
To store additional multimedia files, you need insert a memory card. Follow the instructions
above as for fitting a SIM card. If you choose to install a memory card you may only use one SIM
card.
Warning: Use only memory cards that carry the SD Card logo otherwise they may damage
your JCB Tough Tablet. You can install up to a maximum of 128GB additional memory using a
memory card.
