jcb S1530E, Operator'S Manual, Page: 47 / 120

Operation
Lifting the Machine
39 9831/3200-3 39
Lifting the Machine
General
Lifting by Forklift
Do not lift the machine from the side. Lifting the machine from the side may cause machine damage.
1. Make the machine safe with the platform lowered.
2. Check the extension platform, controller and chassis parts are correctly secured.
3. Remove any loose items from the machine.
4. Keep the machine in the lowered position while lifting with the forklift.
5. Use the forklift slots at the ladder side at the end of the machine.
5.1. Align the forks with the forklift slots at the end of the machine.
5.2. Drive the forklift forwards until the forks carriage almost touches the ladder
5.3. When lifting the machine rotate the forks back slightly to ensure the machine will not slide off the forks.
Travel with the machine at the specified distance from the ground.
Length/Dimension/Distance: 0.4m
5.4. Level the forks before landing the machine.
Figure 29.
A
A Forklift slots
Lifting by Hoist
1. Make the machine safe with the platform lowered.
2. Check the extension platform, controller and chassis parts are correctly secured.
3. Remove any loose items from the machine.
4. Use the correct length of hoisting rope to prevent damage to the platform base and guardrail.
5. Make sure the hoist rigging is in the correct position. Adjust the hoist rigging to prevent machine damage
and keep the machine in the level position.