JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0845 6005526
Assembly Instructions
4
Ref.
Description
Q.ty
1
Round Head square neck Bolt M8 x 60 2
2
Washer
2
3
Hanle Fixing Knob
2
4
Hexagonal Nut M8
2
Tools required, not supplied
A
B
A
C
1
2
3
4
4
3
2
1
D
E
F
G
NOTE - The machine can be supplied with some parts
already assembled.
WARNING - Unpacking and completing the assembly
should be done on a flat and stable surface, with
1.
Raise the lower part of the pre-fitted handle (A) to
its working position and lock into place using the
lower knobs (B).
2.
Attach the top of the handle (C) using the screws
(1), washers (2), knobs (3) and nuts (4) supplied, as
shown.
3.
Fit the cable clamps (D) as shown and secure the
control cables.
Release the blade brake by holding the control lever
against the handle.
Pull the starter rope (E), fit it in the guide spiral (F)
and tighten the nut (G)
.
enough space for machine handling and its packaging,
always making use of suitable equipment.
Disposal of the packaging should be done in accor-
dance with the local regulations in force.
Fittings supplied
8
1
2
3
4
1
2
3
JCB rsb 48_11-171503976/0:JCB rsb 48_11-171503976/0 7-12-2010 10:26 Pagina 4
