background image

SAFETY NOTICE

ELECTRICAL

WARNING!

 It is the user’s responsibility to read, understand and comply with 

the following electrical instructions:
Ensure the risk of electrical shock is minimised by the installation of appropriate 
safety devices
Inspect the charger cable and connection for wear and damage to ensure the 
items are safe before connecting to the mains power supply
DO NOT use if worn or damaged
Check cables are always protected against short circuit and overload
DO NOT place the connector into any area of the worklight except the correct 
outlet socket
DO NOT use the cable to charge or power any other electrical items
DO NOT wet the cable or use in wet or damp conditions (indoor use only)

MAINTENANCE & STORAGE

Keep the worklight clean from dirt and grease using a damp cloth
DO NOT submerge in water
DO NOT clean the worklight with solvents
DO check the product for damage before each use
If the product is not used for a long time , the battery will go into over discharge
protection. To re-activate the battery, charge three or four times for 30 seconds 
until the indicator light comes on. Then fully charge the battery as normal. 

Reviews: