3
JCB-TRIP
Instruction Manual
OPERATION
Place the Tripod on a level surface
Open the legs using the switch until they click into place
Use the adjustable height clips to adjust the tripod to the required height
JCB Worklights can be fixed directly on to the Tripod using the fixed wing bolts on the
Worklights
Alternatively, the extension bar can be attached to the tripod using the wing bolt attached
to it
The extension bar can be used to fix two JCB Worklights to or can be used to hang them
from it
SAFETY NOTICE
GENERAL
Always use on a level surface
DO not overload the Tripod
DO NOT use if you suspect the product is damaged
DO NOT place the product in or near naked flames
Only use with compatible products
Prior to use carry out the necessary risk assessment considering the people who could be
at risk, the level of risk and the precautions required to control the risk.
MAINTENANCE & STORAGE
When not in use store the product in a safe, clean, dry environment out of the reach of
children
DO NOT clean with solvents
Check the product for damage before each use
When this fitting comes to the end of it’s life DO NOT dispose of it with your normal
household waste - please recycle where the facilities exist
