Positec Australia Pty Limited
Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia
www.jcb-tools.com
Customer Helpline 1300 889 028
TROUBLESHOOTING
1. If your sander will not operate, check the power at the mains plug.
2. If the sander does not abrade surface, checking the sanding paper. If the
sanding paper have been worn, replace the new paper and try again. The paper
must be kept in a dry place, if it is allowed to become damp, the abrasive particles
will lose their adhesion to the backing paper and will not abrade.
3. If the sander dose not move smoothly, The sanding paper may be loose,
damaged or wrinkled. Replace and try again.
4. If a fault can not be rectified return the sander to an qualified person for repair.
Summary of Contents for JCB-SS280
Page 2: ......
