jcb JCB-SS280, Safety And Operating Manual

Page: 13 / 16

Positec Australia Pty Limited
Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia
www.jcb-tools.com
Customer Helpline 1300 889 028
4. CYCLONIC DUST BOX
(See D)
A) ATTACH THE CYCLONIC DUST
BOX
Your sander is equipped with a
cyclonic dust box. To attach, slide
the box onto the outlet piece and
take care that the latching lever
engages.
CAUTION:
To prevent the possibility of
sanding dust or foreign body being
thrown into your face or eyes, never
attempt to use your sander without
the dust box properly installed.
B) EMPTY THE CYCLONIC DUST
BOX (See E1,E2)
For more efficient operation,
empty the cyclonic dust box every
5-10mins. This will permit the air
to flow through the box better. To
empty the box, press the latching
lever in and pull off the box. Then
press the button at the rear of the
box to open it, and shake out dust.
5. FLUSH SANDING
FACILITY
Your sander can sand flush on three
sides of the base plate which allows
easy access to corners and edges
of mouldings.
6. ORBITAL SANDING
Your sander operates in small
circular rotations which allow
efficient material removal. Operate
A2
11
1
2
A1
11
C
5
B
1 2
D
E2
E1