To operate using the mains cable supplied
Ensure that the cable is unplugged and not connected to the electricity source
Remove the plug cover cap A as shown in figure 1
Align the connector B with the socket A and push gently so that it locates and locks
into place as shown in figure 2 AB
Turn on the electricity, switch on the light and use the brightness settings to get the
level required
To remove turn the connector in the direction of the arrow shown twist and remove
as per figure 2 AB after disconnecting from the electricity supply and replace the dust
cover cap
The mains lead powers the light only and will not charge batteries
OPERATION
- USING MAINS CABLE
Version: 2.0/0923
Version: 2.0/0923
