background image

25

JCB-MS-305SB-L
Instruction & User Manual

Storage 

Store the machine and its accessories in a 
dark, dry and frost-free place, inaccessible to 
children. The ideal storage temperature is 

between 5 and 30˚C. 

Store the power tool in its original packaging. 
Cover the power tool to protect it from dust 
and humidity. 
Keep the operating manual with the power 
tool. 

Disposing of transport packaging 

The packaging protects the machine from 
damage during transport. The packaging 
material is usually chosen for factors of 
environmental friendliness and disposal. It can 
therefore be recycled. Returning the packaging 
to the material life cycle saves raw material and 
reduces waste. 
Packaging parts (e.g. plastic sheets, Styropor®) 
can be dangerous for children. Risk of choking! 
Store packaging parts beyond the reach of 
children and dispose of them as soon as 
possible 

Old devices must not be disposed of 
with household waste! 

This symbol indicates that this product 
must not be disposed of together 
with domestic waste in compliance 

with the Directive (2012/19/EU) pertaining 
to waste electrical and electronic equipment 
(WEEE). This product must be disposed of at 
a designated collection point. This can occur, 
for example, by handing it in at an authorised 
collecting point for the recycling of waste 
electrical and electronic equipment. Improper 
handling of waste equipment may have 
negative consequences for the environment 
and human health due to potentially 
hazardous substances that are often contained 
in electrical and electronic equipment. By 
properly disposing of this product, you are 
also contributing to the effective use of natural 
resources. You can obtain information on 
collection points for waste equipment from 
your municipal administration, public waste 
disposal authority, an authorised body for 
the disposal of waste electrical and electronic 
equipment or your waste disposal company. 

DISPOSAL AND RECYCLING  

Summary of Contents for JCB-MS-305SB-L






























Reviews: