6
JCB-MS-210C
Instruction & User Manual
–
hearing protection used for
appropriate conditions will reduce
personal injuries.
–
Carrying power tools with your finger
on the switch or energizing power
tools that have the switch on invites
accidents.
c
Prevent unintentional starting.
Ensure the switch is in the
off-position before connecting to
power source and/or battery pack,
picking up or carrying the tool.
–
A wrench or a key left attached to a
rotating part of the power tool may
result in personal injury.
–
This enables better control of the
power tool in unexpected situations.
d
Remove any adjusting key or wrench
before turning the power tool on.
e
Do not overreach. Keep proper
footing and balance at all times.
–
Loose clothes, jewellery or long hair
can be caught in moving parts.
f
Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from
moving parts.
–
Use of these devices can reduce dust
related hazards.
g
If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used.
–
A careless action can cause severe
injury within a fraction of a second.
h
Do not let familiarity gained from
frequent use of tools allow you to
become complacent and ignore tool
safety principles.
4
Power tool use and care
–
The correct power tool will do the job
better and safer at the rate for which it was
designed.
a
Do not force the power tool. Use the
correct power tool for your
application.
–
Any power tool that cannot be controlled
with the switch is dangerous and must be
repaired.
b
Do not use the power tool if the
switch does not turn it on and off.
–
Such preventive safety measures reduce the
risk of starting the power tool accidentally.
c
Disconnect the plug from the power
source before making any
adjustments, changing accessories,
or storing power tools.
–
Power tools are dangerous in the hands of
untrained users.
d
Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool.
–
Many accidents are caused by poorly
maintained power tools.
–
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
e
Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tools operation. If damaged,
have the power tool repaired before
use.
f
Keep cutting tools sharp and clean.
g
Use the power tool, accessories and
tool bits etc., in accordance with
