jcb JCB-MC300, Safety And Operating Manual

Page: 9 / 16

Positec Australia Pty Limited
Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia
www.jcb-tools.com
Customer Helpline 1300 889 028
NOTE:
Before using the tool,
read the instruction book
carefully.
INTENDED USE
The power tool is intended for
sawing and remodeling wooden
materials, plastic, plaster,
non-ferrous metals and fasteners
(e.g. nails and clamps) as well as
for working on soft wall tiles and for
dry grinding of small surfaces. It is
especially suitable for working close
to edges and for flush cutting.
1. MOUNTING
ACCESSORIES
CAUTION:
For all work or
when changing accessories,
always wear protective gloves.
Avoid risk of injury from the
sharp edges of the accessories.
Accessories can become very hot
while working, presenting danger
of burns! Make sure the tool is
unplugged prior to changing
accessories.
WARNING: To reduce the
risk of injury, do not let the
sharp side of the accessory face
back toward the user’s hand.
To change the accessory
The Tool-Less Blade Change
Lever allows you to change the
accessories without using an Allen
key.
(
1a
)
For accessories with an open-
OPERATING INSTRUCTIONS