Positec Australia Pty Limited
Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia
www.jcb-tools.com
Customer Helpline 1300 889 028
The Variable Speed Dial(3) can
be used to set the optimum
oscillating frequency according
to the accessories used and the
respective application.
High oscillation frequency:
Sanding, sawing, rasping and
polishing stone and metal.
Low oscillation frequency:
Scraping, polishing varnishes.
4. SIGHT LIGHT
The sight light(8) allows you to keep
a clear view under less illuminated
circumstances. To turn on the light,
simply press the on/off switch.
When you release the on/off switch,
the light will turned off.
5. ELECTRONIC
FEEDBACK
Your tool is equipped with an
internal electronic feedback system
which helps keep the preselected
speed virtually constant between
no-load and load conditions.
APPLICATION
WARNING:
the saw teeth are
very sharp. Do not touch
during mounting and application.
The workpiece must be clamped
tightly before it is cut.
Summary of Contents for JCB-MC300
Page 16: ......
