7
JCB-FLH40
Instruction Manual
OPERATION
CHARGING WARNING!
Ensure that you read and fully understand the safety
instruction before use
Charge the batteries before use
IMPORTANT!
Ensure the worklight is turned OFF while charging. Failure to do so will
damage the charger plug/vehicle plug
Connect the charging plug into the charging socket located on the rear of worklight
Connect the 230V charger or 12-24V DC charger to a power supply
The LED battery indicator will flash whilst charging and remain constant when fully charged
Disconnect the charger from the worklight when it is fully charged and replace the dust cap
DO NOT shine the product directly into the eyes of people or animals
MAINTENANCE & STORAGE
When not in use store the product in a safe, clean, dry environment out of the reach of
children
Keep the worklight clean from dirt and grease using a damp cloth
DO NOT submerge in water
DO NOT clean the worklight with solvents
Check the product for damage before each use
If the product is not used for a long time , the battery will go into over discharge
protection. To re-activate the battery, charge three or four times for 30 seconds until the
indicator light comes on. Then fully charge the battery as normal.
