background image

5

JCB-FLH40
Instruction Manual

SAFETY NOTICE

GENERAL

Ensure the worklight is correctly charged before initial use
DO NOT cover or block the lens during use
DO NOT shine the product directly into the eyes of people or animals
DO NOT allow children to use the worklight
DO NOT handle or move the worklight while it is being charged 
DO NOT use the worklight if you suspect the battery or casing is damaged
DO NOT place the product in or near naked flames
DO NOT open the equipment or touch any of the internal parts
Ensure replacement batteries are genuine batteries of the same rating
Ensure the worklight is unplugged and allow to cool before attempting cleaning & maintenance

BATTERY

WARNING!

 To reduce the risk of fire or burns:

DO NOT attempt to open, disassemble, modify or service the battery
DO NOT expose to temperatures above 40ºC
DO NOT crush, puncture, short external contacts or dispose of in fire or water
DO NOT dispose of with regular waste - dispose of the old batteries in accordance with 
local authority battery regulations
DO NOT cover the battery while charging
Ensure the charger is switched off and disconnected from the worklight before attempting 
to open the lamp unit
Replace only with the batteries designated for this product
If the electrolyte in the cells comes into contact with the skin, wash thoroughly with soap 
and water
If the electrolyte in the cells comes into contact with the eyes, rinse thoroughly with cold 
water and seek immediate medical attention

Prior to use carry out the necessary risk assessment considering the people who could be 
at risk, the level of risk and the precautions required to control the risk.

Summary of Contents for JCB-FLH40









Reviews: