background image

JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092  

Indicator 

ON/
OFF 
flash

Status

Red on

Charging

Red flash

 -  -  -  -  -

Defective 
Battery

Green on

Fully Charged

Green flash

- -  -  -  -  -

Hot/Cold 
Delay

HOT/COLD BATTERY PACK 
DELAY
This charger has a HOT/COLD 
battery pack delay feature. When 
the charger detects a battery 
pack that is too hot or cold (the 
light will be green and flash), 
it automatically starts a HOT/
COLD Pack Delay, and suspends 
charging until the battery pack has 
reached the correct temperature. 
The charging process will then 
automatically begin (the light 
will be red). This feature ensures 
maximum battery life.

LEAVING THE BATTERY PACK 
IN THE CHARGER
If a fully charged battery pack is 
left in the charger, the logo will 
remain green. The battery pack 
will remain charging with a trickle 

current.
NOTE: A battery pack will slowly 
lose its charge when kept out of 
the charger or left in an unplugged 
charger for a long time. It may 
need to be recharged before use.

WEAK BATTERY PACKS
This charger will detect a weak 
battery pack. When a weak battery 
pack is inserted into the charger, 
the charger will try to repair it. This 
process will last about 30mins (the 
light will be red). When the repair is 
finished, it will automatically begin 
to charge the battery pack to the 
highest capacity possible (the light 
will be red). If the light becomes 
flash, indicating the battery pack is 
dead. 
NOTE: Repaired battery packs 
are still usable but should not be 
expected to perform as much work 
as new battery packs.

IMPORTANT CHARGING 
NOTES:
1. For a new battery or a battery 
that has been in storage for 
sometime, please recharge the 
battery before use. If you want to 
store the battery for a long time, 
please fully charge the battery 
pack to ensure maximum battery 
life.

Summary of Contents for JCB-FCH20LI2

















Reviews: