background image

6

JCB-20BC

Instruction & User Manual

OPERATING INSTRUCTIONS

Intended Use

These chargers are intended for use only with 
compatible JCB 20V power tools and lithium-
ion battery packs.
The charger must not be modified or used for 
any other purposes than the ones described in 
these instructions.

Battery

The charger must be disconnected from the 
power supply when inserting or removing 
the battery.

NOTE

 

m

Do not use excessive force when 
inserting or removing the battery 
pack from the charger.

 An incorrectly 

connected battery can damage the battery 
terminals or the battery socket on the 
power tool or charger.

 

m

Use the button on the battery to check the 
charging status; 4 red LEDs indicates fully 
charged, where 1 red LED indicates low 
battery charge status.

Charging The Battery

After charging for the first time, ensure the 
battery is completely discharged before 
placing on charge again. Repeat this charging 
and discharging cycle 4 to 5 times to ensure 
the battery is correctly conditioned.

WARNING!

 

m

Place the battery charger on a level and 
stable surface. Connect the battery pack to 
the charger so that it clicks in to place.

 

m

Plug the charger into a suitable power 
supply. Note: ensure the voltage on the 
charger rating label matches the power 
supply voltage. 

 

m

Refer to the Battery Charge Level table 
below for battery charger status as displayed 
by the charger indicator LED lights.

 

m

When the battery pack is fully charged, 
unplug the battery charger from the power 
supply and remove the battery pack from 
the charger.

LITHIUM ION BATTERY TECHNICAL DATA

Battery 

Code

 

Battery 

Size

Number  

of cells

Voltage

Battery 

Capacity

Charge Time

(Fast Charger:  

JCB-20VFC)

Charge Time

(Super Fast Charger: 

JCB-20VSFC)

Charge Time

(Dual Charger:  

JCB-20DC)

JCB-20-15LI

Small

5

20V

1.5Ah

30 mins

20 mins  

25 mins

JCB-20-20LI

Small

5

20V

2.0Ah

45 mins

30 mins  

35 mins

JCB-20-30LI

Large

10

20V

3.0Ah

65 mins

40 mins

45 mins

JCB-20-40LI

Large

10

20V

4.0Ah

90 mins

55 mins

60 mins

JCB-20-50LI

Large

10

20V

5.0Ah

110 mins

65 mins

75 mins

Charger Fuse Rating:

T2.4A

T3.15A

T5A

Times given as a guide only. Battery charge and discharge times dependant on age, usage and condition.

Summary of Contents for JCB-20VFC









Reviews: