7
JCB-18USB
Instruction & User Manual
Maintenance
Remove the battery pack from the tool or
charger before cleaning and maintenance.
This helps avoid the risk of electric shocks
and accidental injury.
WARNING!
m
Wipe the charger with a dry or damp cloth.
Do not use a wet cloth.
Do not use
detergent that contains solvent or
corrosive, abrasive additives.
This risks
damaging the surfaces of the charger.
m
Clear the battery connection terminals and
the release button of dust and dirt after
each use.
Do not clean terminals by
inserting sharp objects in them, such
as screwdrivers and other similar
objects.
m
Stubborn contamination in areas hard to
access can be removed with compressed air
(max 3. bar).
m
Regularly check all fasteners, screws and
bolts to make sure that they are tight.
Tighten any loose screws immediately or
serious injury could occur.
Never open the battery pack. The battery
pack has no internal parts that the user can
service or repair. Never try to repair the
battery pack yourself. Take to an authorised
service centre.
WARNING!
Transport and Storage
m
If the charger will remain unused for any
length of time, it should be stored in the
original packaging, or in a compatible JCB
power tool storage insert.
m
Store the charger in a dry, frost-free, well
ventilated place with a temperature of no
more than 40°C.
m
Keep all chargers out of the reach of
children.
m
Always remove the battery from the charger
before transport.
m
Ensure that the charger is not at risk of being
exposed to excessive vibration and shocks
during transport, especially if the charger will
be transported by car or other vehicle.