background image

8

JCB-18MT

Instruction & User Manual

 

m

To reduce risk of injury, only charge 
JCB rechargable batteries listed in 
this manual.

 The charger and battery 

packs are specifically designed to work 
together. Other types of batteries may burst 
causing fire and personal injury.

 

m

Do not allow any liquid to get inside 
the charger. 

Electric shock may result.

 

m

Do not expose the charger to rain or 
snow

 

m

Under certain conditions with the 
charger plugged into the power 
supply, the exposed charging contacts 
inside the charger can be shorted by 
foreign materials. 

Foreign materials of a 

conductive nature such as, but not limited 
to, steel, wool, aluminium foil or any buildup 
of metallic particles should be kept away 
from charger cavities. 

 

m

 

Always unplug the charger from 

the power supply when there is no 
battery in the cavity. 

 

m

Unplug the charger from the power 
supply before attempting to clean.

 

m

Do not operate the charger with a 
damaged cord or plug. 

Have them 

replaced immediately.

 

m

The charger is designed to operate 
on standard 230V household 
electrical power. Do not attempt to 
use it on any other voltage. 

CHARGER SAFETY

Before using charger, read all instructions and 
cautionary markings on charger, battery pack 
and product using battery pack. 

WARNING!

Summary of Contents for JCB-18MT






















Reviews: