Positec Australia Pty Limited
Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia
www.jcb-tools.com
Customer Helpline 1300 889 028
OPERATION
1.COLLET LOCKING SLEEVE
Pull the collet locking sleeve forward.
Fully insert the desired bit into the
chuck and release the collet locking
sleeve. The collet accepts only
standard 1/4” hexagonal shank
accessories with power groove.
Do not use this tool as a drill. Tools
equipped with shut-off clutches are
not designed for drilling applications.
The clutch can shut off automatically
and without warning. Attempting to
restart drilling after shut-off has been
reached can cause the tool to twist
out of your hand until the clutch again
reaches shut-off. Do not attempt to
insert quick change type drill bits into
this chuck.
2. REMOVING A BIT
HOLDER, SOCKET OR
SCREWDRIVER BIT (See B)
Pull the collet locking sleeve forward.
Take the tool out of the chuck and
release the collet locking sleeve.
3. FORWARD, REVERSE
ROTATION AND LOCK
CONTROL (See C&D)
Your tool is equipped with a forward,
reverse rotation and lock control
located above the on/off switch. It
was designed for changing rotation
of the chuck and for locking the on/
A
B
C
D
Summary of Contents for ID20LIBL2
Page 2: ......
