Positec Australia Pty Limited
Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia
www.jcb-tools.com
Customer Helpline 1300 889 028
OPERATING INSTRUCTIONS
NOTE:
Before using the tool,
read the safety and operating
manual carefully.
INTENDED USE:
This tool is intended for the fastening
and loosening of bolts, nuts and
various threaded fasteners. This tool
is not intended for use as a drill.
BEFORE PUTTING INTO
OPERATION
1) CHARGING THE BATTERY
PACK
Your battery pack is UNCHARGED
and you must charge once before
use.
WARNING:
The charger and
battery pack are specifically designed
to work together so do not attempt to
use any other devices. Never insert
or allow metallic objects into your
charger or battery pack connections
because an electrical failure and
hazard will occur.
2) TO REMOVE OR INSTALL
BATTERY PACK (See A)
Depress the battery pack release
button to release and slide the
battery pack out from your tool. After
recharge, slide it back into your tool.
A simple push and slight pressure will
be sufficient.
A
B
C
D
Summary of Contents for ID20LIBL2
Page 2: ......