background image

JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0845 6005526

ADDITIoNAL SAfETy PoINTS foR youR CoMBI DRILL

1.  Remove the battery pack 
from the drill before carrying out 
adjustments.
2.  Do not expose to rain or water.
3.  Do not store the battery pack 
in temperatures over 40

o

C. 

4.  Always charge the battery 
pack between temperatures 0

o

to 30

o

C. Ideal charging 

temperature is 18

o

C to 24

o

C.

5.  Only use the charger and the 
battery pack provided no others.
6.  Avoid short circuit of the 
battery pack connections (screws 
& nails).
7.  Do not incinerate or burn the 
battery pack, it may explode.
8.  Do not charge a damaged 
battery pack.
9.  Replace any damaged supply 
cords on your charger.
10. Always disconnect the charger 
power supply before making or 
breaking the connections to the 
battery pack.
11. Battery pack and charger will 
be warm during charging this is 
normal.
12. When not in use, remove a 
charged battery pack from the 
charger.
13. Always remove the battery 
pack from the charger 
immediately after re-charging is 
completed.
14. Your drill and battery pack will 
be warm when working, this is 
normal.

15. Do not dispose of batteries 
in fire, or with household waste. 
Return exhausted batteries to 
your local collection or recycling 
point.
16. Always check walls, floors and 
ceilings for hidden power cables 
and pipes.
17. Use auxiliary handles supplied 
with the tool. Loss of control can 
cause personal injury.
18. Wear ear protection with 
cordless drill. Exposure to noise 
can cause hearing loss.
19. Accessories and metal parts 
can become very hot.
20. Hold tool by insulated gripping 
surfaces when performing an 
operation where the cutting 
tool may contact hidden wiring. 
Contact with a ‘live’ wire will also 
make exposed metal parts of the 
tool ‘live’ andresult in operator 
injury.

 

WARNING: If a small 
amount of electrolyte 

should leak from the battery pack 
under extremes of temperature 
or after heavy use, then wash 
off immediately from your skin 
and hands using clean water.

 For 

eye contact, rinse thoroughly with 
clean water and seek medical 
treatment immediately.

Summary of Contents for CD20LIBL






















Reviews: