JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0845 6005526
oPERATING INSTRuCTIoNS
NoTE:
Before using the tool,
read the safety and operating
manual carefully.
INTENDED uSE
The machine is intended for driving
in and loosening screws as well
as for drilling in wood, metal and
plastic.
BEfoRE PuTTING INTo
oPERATIoN
A) CHARGING THE BATTERy
The battery charger supplied
is matched to the Li-ion battery
installed in the machine. Do not use
another battery charger.
The Li-ion battery is protected
against deep discharging. When
the battery is empty, the machine
is switched off by means of a
protective circuit: The tool holder no
longer rotates.
In a warm environment or after
heavy use, the battery pack may
become too hot to permit charging.
Allow time for the battery to cool
down before recharging.
When the battery pack is charged
for the first time and after prolonged
storage, the battery pack will accept
a 100% charge after several charge
and discharge cycles.
B) To REMovE oR INSTALL
BATTERy PACK (See 1 )
Depress the battery pack release
button (6) to release and slide the
1
6