5
ChARGING
Ensure the switch is in the OFF (O) position.
Plug the adaptor into a mains outlet and place
the vacuum into the charger base
A
.
Turn off the adaptor after 16 hours.
The charger base can be wall mounted for
convenient storage.
WARNING!: Always ensure that
you are not drilling into the wall
adjacent to any electrical wires
or pipes such as water or gas.
1.
Find a suitable position on the wall or
cupboard where the charger base is to be
positioned.
2.
Mark the fixing points through the
bracket.
3.
If you are fixing to a solid brick or block
wall, use a 6mm masonry drill and drill to
a depth of 25mm.
4.
If fixing to a wood or cupboard surface,
drill a 2mm pilot hole or use a bradawl.
È
È
Ó
Ô
Ô
Ô
⁄
¤
‹
›fi
fl‡
·
„
‰
‚
Â
⁄
¤
‹
›fi
fl‡
·
„
‰
‚
Â
⁄
¤
‹
›fi
fl‡
·
„
‰
‚
Â
Standard accessories
Application
Textiles and upholstery
(with nozzle)
Shelves and hard surfaces
(with brush)
TOOlS AND
ACCESSORIES
Extension hose
Attach the extension hose
Â
to the suction
inlet
⁄
. The various nozzles can be attached
the end of the extension hose
B
or directly to
the suction inlet.
Dusting brush
‚
This nozzle is for pelmets, delicate objects etc.
Crevice tool
„
This nozzle is for awkward places, corners and
behind radiators etc.
Soft crevice tool
‰
This nozzle is for awkward but delicate places,
corners and behind radiators etc.
This nozzle is to be attached to the end of the
crevice tool
C
.
On board light
This illuminates when the vacuum cleaner is
switched on and when charging.
B
C
A
