jcb 540-170, Service Manual

Page: 134 / 149

Section 3-2 - Routine Maintenance
Service Schedules - Machines with SD and SF Engines
Functional Test and Final Inspection
3-2-7 3-2-7
9803/3750-05 (3-20-00)
Functional Test and Final Inspection
Operation 10 50 100 (1) 500 1000 2000 6000
ENGINE
Idle Speed (2)
- Check and Adjust
Torque Converter Stall Speed (2)
- Check
Max. No-Load Speed (2)
- Check and Adjust
Exhaust Smoke - Check
Exhaust System Security (2)
- Check
Air Inlet System Security - Check
Throttle System and Control Cable (2)
- Check
Engine for Vibration/Noise
TRANSMISSION, AXLES AND STEERING
Steering - Operation/Phasing - Check
2WD/4WD Selection (if fitted) - Check
Transmission Operation - Check
Forward/Reverse/Gear - Selection/
Operation - Check
Torque Converter Main Line Pressure (2)
- Check
Neutral Start Operation - Check
Clutch Disconnect/Dump Pedal/Button - Check
HYDRAULICS
MRV Pressure at Max RPM (2) - Check and Adjust
Operation of All Services - Check
Hose Burst Protection Valves (if fitted) - Check
ARV Pressure at 750 RPM (2) - Check and Adjust
Steer Circuit MRV Pressure (2) - Check and Adjust
Fan Motor Speed (If fitted) (2) - Check
Attachment Operation/Remote Servo (if
fitted) - Check
Piston Rods Chrome - Check
Boom Extension/Phasing (3 stage boom) (2) - Check
Parallel Lift/Lower - Check
Stabilizer Leg Cut-out (if fitted) (2) - Check
ProCarManuals.com