16
21-18JS
Instruction & User Manual
When sawing wood it is best to use an addi-
tional dust protection mask as wood dust is a
health hazard.
NOTE
Parallel Stop
To cut parallel to a wood edge you can use
the enclosed parallel stop. In order to fix the
parallel stop:
m
Loosen the fastening screws slightly.
m
Using the centimetre scale on the parallel
stop, you can adjust the distance between
the stop bar and the saw blade.
m
Secure parallel stop by tightening the
fastening screws in the desired position.
m
When not using the parallel stop, tighten the
fastening screws securely. Otherwise the
screws can be unscrewed and fall off due to
the vibration of sawing.
Maintenance
Switch off the power tool and disconnect
the power (remove battery/unplug) before
cleaning and maintenance. This helps avoid
the risk of electric shocks and accidental
starting.
WARNING!
m
Wipe the power tool with a dry or damp
cloth.
Do not use a wet cloth.
Do not
use detergent that contains solvent or
corrosive, abrasive additives.
This risks
damaging the surfaces of the power tool.
m
Clear the power tool vents and the
accessory mount of dust and dirt after each
use.
Do not clean ventilation holes by
inserting sharp objects in them, such
as screwdrivers and other similar
objects.
m
Stubborn contamination in areas hard to
access can be removed with compressed air
(max. 3 bar).
m
Regularly check all fasteners, screws and
bolts to make sure that they are tight.
Tighten any loose screws immediately or
serious injury could occur.
Never open the power tool. The power
tool has no internal parts that the user can
service or repair. Never try to repair the
power tool yourself. Take to an authorised
service centre.
WARNING!
Transport and Storage
m
If the power tool will remain unused for any
length of time, it should be stored in the
original packaging.
m
Store the power tool and battery in a dry,
frost-free, well ventilated place.
m
Keep all tools out of the reach of children.
m
Always switch off the power tool and
disconnect it from the power supply
(remove the battery/unplug the power
cord) before transport.
m
Always carry the power tool using the
purpose-designed handle.
m
Ensure that the power tool is not at risk
of tipping over or exposed to excessive
vibration and shocks during transport,
especially if the power tool will be
transported by car or other vehicle.
Operating temperature: 0-40 °C
Storage temperature: 20-60 °C
NOTE
2825 21-18JS Jig Saw Manual.indd 16
2825 21-18JS Jig Saw Manual.indd 16
08/07/2021 14:48
08/07/2021 14:48