background image

2

21-18ID

Instruction & User Manual

GENERAL WARNINGS & DISPOSAL

To reduce the risk of injury, the user must read the instruction manual.

The device must not be exposed to rain or immersed in water.

Do not allow any part of the device to come into contact with flames, or to 
catch fire.

This symbol is used throughout this manual to warn the user about potential 
risks. Please read & understand these sections before using the device.

Personal Protective Equipment (P.P.E.), such as ear defenders, eye protection, 
safety gloves and a dust mask, must be worn during the operation of the 
device. 

This product has been marked with a symbol relating to removing electric and 
electronic waste. The product should not be discarded with household waste 
but must be returned to a collection system which conforms to the European 
Directive 2012/19/EU. It will then be recycled or dismantled in order to 
reduce the impact on the environment. Electric and electronic equipment can 
be hazardous for the environment and for human health since they contain 
hazardous substances.

Do not expose battery pack or tool to fire or excessive temperatures.

Do not dispose of batteries in household waste. Return exhausted batteries 
to a local collection or recycling point.

The month and year of manufacture can be found within the product serial number e.g. 

MMYY

PPPAXXXXX

. Where production month (MM) and production year (YY) are included. 

21-18ID Designation of the tool (18 - 18Vdc, ID - Impact Driver)

21-18ID Impact Driver Manual 2021.indd   2

17/06/2021   12:03

Summary of Contents for 21-18ID






















Reviews: