JBT Fresh'n Squeeze Series, Service Manual

Page: 10 / 96

10
FNS-0014-060-EN June 2019 Rev A
Service 1
A. Total Cycles – Indicates the total number of cycles the juicer has run. This is value can be
changed by clicking on it. This is only meant for cases where electrical boxes are being
replaced so that the total juicers cycles will not be lost.
B. Cycles since last service – Indicates how many cycles have run since the last time the juicer
was serviced.
C. Reset Service Date – The button to the right of this will reset the service date shown below as
well as on the status screen.
D. Last Service Date – This shows what the date of the last service was for the juicer. The format
for this date is: Month Day Year.
E. Support Phone Number – Phone number for the service company for the juicer. To change
the number, simply click on the number itself and a keyboard will appear. If desired, dashes and
symbols can be added by clicking the down arrow on the top left twice, the dash is next to the
enter button. Click the up arrow in the top left to return to the numbers. This phone number
appears for general users on the Status page and Safety Fault screen.
F. Constant speed setting – Setting for testing the juicer at a constant speed either slower or
faster than normal operation. To use this feature the juicer must be on the normal speed setting
(top option on the settings screen). Once on this setting, the juicer will operate at whatever
frequency is specified here between 15 and 90 Hz. For example, with this feature the juicer can
be set to run at 15 Hz to see if parts are interfering with each other. This is programed to
default to 60 Hz whenever the juicer is powered off so as not to affect customer operation.
A
B
C
D
E
F